What should stamping parts manufacturers do if they encounter iron failure during stamping die production?

In the process, because the stamping die and the metal material are in a hard-to-hard state, the metal material will fall off during the stamping and shearing of the metal material, which also puzzles many stamping parts manufacturers. Xiaoshuo sorted out a few points, hope It's helpful to everyone. (1) Recalculate the bead position or bending position when the bead is misaligned. (2) The bending gap is too small, and the gap is adjusted by extruding iron chips, or the forming block is ground or the punch is ground. Sharpen the R angle (4) Too little material for connecting the knife edge. Reconnect the knife edge. (5) The bead is too narrow and re-grind the bead. Some metal materials are more powdery. It is also recommended to install a blower on the work surface. There are more than 20 hardware Ru0026D and design engineers, a 5000 square meter production workshop, and the precision of stamping parts can reach 0.01MM. It is a stamping parts manufacturer with many customers' reputation. We have a good cooperative relationship with China Mobile, Hitachi, Amazon and other companies!